The roughness of the nozzle usually refers to the microscopic unevenness of its inner hole and outer diameter surface, which can affect the effectiveness and lifespan of the nozzle. Specifically, the roughness of the nozzle can be quantified by surface roughness parameters, with the commonly used parameter being Ra (arithmetic mean deviation of the contour), which represents the average of the surface's ups and downs within a certain range, measured in micrometers.
The influence of different roughness on the performance of wire nozzle
Ra0.4 μ m~Ra0.8 μ m: This is the typical roughness range of the conductive nozzle hole. Within this range, the resistance of fluid flow is smaller, resulting in better spraying effect and higher uniformity and consistency of spraying.
Ra0.1 μ m: For tungsten carbide wire nozzle, the roughness of its inner hole and outer diameter reach Ra0.1 μ m and Ra0.05 μ m, respectively. This high-precision roughness minimizes the damping of the enameled wire during friction in the hole, ensuring good insulation of the processed product.
Methods for measuring and controlling roughness
Using a surface roughness meter: This instrument can measure the Ra value of the surface and adjust it based on the measurement results.
Choosing high-precision machining equipment and processes: By precision grinding and polishing, surface roughness can be significantly reduced.
Regular inspection and replacement of ducts: ensure the long-term stability and accuracy of ducts.

